Be Master to multiple Slaves

[smarek]

Currently only one Slave Hytera repeater is supported, allow connecting multiple Slaves and translate all of them to single MMDVM upstream

• Local repeater data pair against source IP address
• Translation queues should contain source/destination info
• Track state per-repeater
• Spawn RDAC/DMR protocol handler for each repeater (or distinguish within)
• Add option to disconnect from MMDVM once all Hytera repeaters disconnect, tracking Disconnect mmdvm if Hytera repeater not connected #18
• Logging is kind of messy currently, each incoming and outgoing packet gets logged n-times (n=number of slave repeaters connected)
• missing per-repeater configuration within .ini file, currently defaults are shared between all slaves

@do1kbl

[smarek]

As of 23aa916 multiple repeaters can connect at once to HHB and each will be transported using separate connection to the same MMDVM/Homebrew master, so failure of one slave/thread should not affect others. ID, CALLSIGN, etc.. are taken currently from same configuration but provided SNMP/RDAC work, MMDVM master will see the repeaters by their assigned ID/CALL/...

[smarek]

As od 8dbbe29 this should work better, since separate Hytera DMR Data UDP port is provided