underscore adjusments?

Author: Johnhaug223

docs/source/live_cell/live_cell.rst

@@ -1,8 +1,8 @@
 .. _livecellimaging-home:
 
-###############
+##################
 Live-Cell Imaging
-###############
+##################
 
 ______________________________
 
@@ -85,10 +85,10 @@ assembly based on the following components:
          - Heating pad to wrap around detection objective port
 
 
--------------
+----------------------------------
 
 Live-Cell Imaging Full Assembly
-______________________
+__________________________________
 
 ______________________________
 
@@ -114,7 +114,7 @@ thermocouple wires:
 
     **Figure 2:** Thermocouple adapter assembly process
 
--------------
+------------------------------
 
 Heater Adapter Assembly
 ______________________________
@@ -140,10 +140,10 @@ wires:
 
     **Figure 3:** Heater adapter assembly process
 
--------------
+--------------------------------------
 
 Placing O-rings in the Sample Chamber
-______________________________
+______________________________________
 
 In order to ensure a watertight seal around our objectives, both of our objective ports feature two sets of o-rings
 surrounding their circumference. For our smaller port associated with the TL20X-MPL objective, we use oil-resistant
@@ -165,10 +165,10 @@ grooves are first coated with vacuum grease in the following process:
 
     **Figure 4:** Preparation and Placement of O-rings in the Sample Chamber
 
--------------
+---------------------------------------------------------
 
 Placement of the Heating Pads on the Sample Chamber
-______________________________
+_______________________________________________________
 
 The placement of heating pads on the chamber is a straightforward process, particularly with the adhesive-backed pads
 we detailed in our parts list. In the application process, a general consideration should be made as to the
@@ -191,10 +191,10 @@ to be as efficient as possible with them.The general assembly process is as foll
 
     **Figure 5:** Preparation and Placement of Heating Pads on the Sample Chamber
 
--------------
+------------------------------------------------
 
 Temperature Controller Assembly and Settings
-______________________________
+________________________________________________
 
 With the individual components of our heating assembly prepared, the full assembly of the system is straightforward.
 There is some variation in terms of if one opts to use 3 threaded thermocouples or a combination of one dual-probe

docs/source/physical_assembly/physical_assembly.rst

@@ -322,7 +322,7 @@ aligned vertically with each other.
 ---------------
 
 Ordering Custom Parts from Xometry
-^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 We utilize a number of different custom fabricated elements in our completed system, . There are a number of
 different companies available for this, and we opted for Xometry. The basic ordering process we go through is as