Black Screen in hyperHDR Live with MS2130 and F3 FW when using Yamaha RX A-1080 AVR at OUT2 or Zone Out

[chrisvib]

Hi there,

as mentioned in the title I do not get a picture in the live feed.
I tried to connect my XBOX Series S and immediately had a picture. I use Plex as source on Shield TV and a 1080p clip as example.

Best regards and thanks for help
Chrisvib

[awawa-dev]

Hi
AVR pseudo HDMI-splitters usually behave this way mostly due to missing DRM/HDCP handling and a scaler.

[chrisvib]

Thank you for your fast respond. I thought that there is no need for a scaler when using the MS2130. The videomaterial from plex should be without drm. I did not found a proper explanation of this case and the reasons for this behavior.
if there is a need for a splitter, is Ezcoo EZ-SP12H2 still the best solution. I can use the second hdmi out of the AVR.

[awawa-dev]

Keep in mind that ms2130 hdmi is 1.4b grabber. Are you sure your signal is 1.4b or 2.0? Usually external hdmi splitter like ezcoo should take care of it if you connect it to the second ezcoo output (and enable scaler to handle 4k modes).