aiotunnel can use GET method ?

[ingnelson]

Hello .

aiotunnel can use HTTP tunneling via GET method ?

Because i would like to use a Android device as a client and install aiotunnel on my VPS to create the tunnel like a VPN do .

I will wait your answer.

[codepr]

Hello, you mean only GET method for every stream?

[ingnelson]

@codepr the answer at your question is YES, or use GET or POST or PUT , but not use CONNECT method.
Some guy create a tunnel using only GET or POST or PUT for Downstream and GET or POST or PUT Upstream + shadowsocks to obfuscate the data or create the tunnel . He only let me test it one time , but I captured the packet using TCPDUMP.

My ISP provider restrictions are :

1. My ISP provider only let pass or allow GET method request without HTTP headers (example : Host , Connect etc), so only the first line.
2. My ISP provider blocks the connection if the server send more then 10,000 bytes on one request. so the connection should be multiples connection and multiple request, maybe configure the server if the server send more that 9000 bytes close the connection and the client send other HTTP request to create a new connection ? or it'll require tricky job polling that 10K segments and reassembling them ?

At the end of the first line should end with \r\n ٌُُُُُُّّّّْْْْْْْْْْْْْْْْْْ\r\n\r\n

As you can see this http request do not finish with \r\n\r\n , it finish with \r\n ٌُُُُُُّّّّْْْْْْْْْْْْْْْْْْ\r\n\r\n this has NON-ASCII characters after the first \r\n + space , this NON-ASCII character is the trick to bypass the firewall

The HTTP should be like this:

GET #blablabla# HTTP/1.1\r\n ٌُُُُُُّّّّْْْْْْْْْْْْْْْْْْ\r\n\r\n

On the server (VPS) you can see the HTTP request on bytes like this :

GET #123# HTTP/1.1\r\n\x20\xd9\x8c\xd9\x8f\xd9\x92\xd9\x92\xd9\x92\xd9\x92\xd9\x92\xd9\x92\xd9\x92\xd9\x92\xd9\x92\xd9\x92\xd9\x92\xd9\x92\xd9\x92\xd9\x91\xd9\x91\xd9\x91\xd9\x91\xd9\x92\xd9\x92\xd9\x92\xd9\x92\xd9\x8f\xd9\x8f\xd9\x8f\xd9\x92\xd9\x8f\xd9\x8f\r\n\r\n

The connection is like this :

HTTP request on port 80 using the NON-ASCII characters > Shadowsocks on port 443 > internet > HTTP server listen on port 80 > shadowsocks server listen on port 443

On wireshark program the connection looks like this :

You can see the packet via WIRESHARK:
quantumnica1.zip

Those screenshots are from a android app that create the tunnel like i told you, i just figurate how it works and i want to create the same connection.

Can you create connection like that using GET method , i know you have the knowledge, i need a help from a guy like you.