Support the new/upcoming generic ZHA Zeroconf discovery?

[Hedda]

puddly is working on a new new/upcoming generic Zeroconf discovery for the ZHA integration in Home Assistant to allow it to discover new network-attached Zigbee Coordinator adapters without code changes to the ZHA component in Home Assistant core. Please look into adding support for this Zeroconf discovery formatting, see:

home-assistant/core#126294

The goal with this is that code changes to the ZHA component in Home Assistant core but it puts some new requirement on the firmware site where the manufacturer need to enter unique metadate for each new type and model of network-attached Zigbee Coordinator adapter. This will eventeully also make the old disovery method obeslete:

https://www.home-assistant.io/integrations/zha#discovery-via-usb-or-zeroconf

PS: Alternative is to use the old method but it is likley that new patches to Home Assistant core will be accepted once support for this new formallting/method has been implemented.

[Hedda]

Bump since this "generic ZHA Zeroconf discovery" feature has been merged into Home Assistant's core

• Generic ZHA Zeroconf discovery home-assistant/core#126294

"I'm introducing a new service type: _zigbee-coordinator._tcp.local.. This will allow all future TCP coordinators to be supported without an explicit PR to ZHA. The only expected properties are radio_type (one of ezsp, znp, etc.) and serial_number (must be unique per device and not derived from any Zigbee information, like the Ethernet MAC address). The service name will be shown as-is."

puddly posted comments there and elseware stating that this become the new default for discovering Zigbee Coordiantors.

Tip is to check out code from tube0013 since read that he helped puddly beta test it so also first to implement this feature:

• https://github.com/tube0013/TubesZB-ESPHome-Builder

Noted that he is using get_mac_address and convert that into a serial_number in order to make the serials unique for each device:

• https://github.com/tube0013/TubesZB-ESPHome-Builder/blob/main/esphome-config/tubeszb-efr32-mgm210-poe-2023.yaml#L10

PS: Off-topic but you might also be interested to check out his customized version of the uart component which enable hardware flow control for ESP32 boards:

• https://github.com/tube0013/esphome-components