Hello

[sp372]

Hello, do you think it will be useful to read the schrader tpms sensors, I'm about to do a test and see what happens

[cterwilliger]

I think I remember when I first started looking at the TST sensors that the data sort of looked like schrader. Should work with some tweaking.

…

Sent from my iPad

On Jan 25, 2023, at 18:13, sp372 ***@***.***> wrote: Hello, do you think it will be useful to read the schrader tpms sensors, I'm about to do a test and see what happens Hola crees que sirva para leer los sensores schrader tpms estoy por hacer una prueba y ver qué sucede — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you are subscribed to this thread.

[sp372]

Hello how are you, I have been reviewing the code and I see that it uses Manchester I to decode. For my purposes of reading the schrader tpms sensor (schrader tpms protocol, from rtl_433) I think it is necessary to change to Manchester Thomas, will it be possible to implement it? or how would you do it? Thanks

[cterwilliger]

CC1101 does Manchester Thomas natively. Be aware that CC1101 does Manchester encoding to the entire stream including preamble, sync word, and CRC. https://e2e.ti.com/support/wireless-connectivity/other-wireless-group/other-wireless/f/other-wireless-technologies-forum/126101/cc1101-rx-manchester

[sp372]

Hello question SO means MISO and SI means MOSI?

[cterwilliger]

yes.

[sp372]

Hello bad news with the sketch that uses the module c1101 I do not get any data from my sensor implement the ID of the sensor although it is 7 bytes truncated to leave it in 6 there will be some sketch to only see the decoded bytes, thanks