Replies: 14 comments
-
Hi, This is the output of the program on my Ryzen 7 5800H
|
Beta Was this translation helpful? Give feedback.
-
Thank you very much. zencli is decoding 2 DIMMs 4GB each. Is this what your setup has ? |
Beta Was this translation helpful? Give feedback.
-
no, my machine is configured with 2x8GB module |
Beta Was this translation helpful? Give feedback.
-
Can you pull, build and run the latest The output I would like to examine:
|
Beta Was this translation helpful? Give feedback.
-
Hi
kernel load command: |
Beta Was this translation helpful? Give feedback.
-
@nhattu1986 Thanks. Something I don't understand with this APU which queries no UMC data from driver. |
Beta Was this translation helpful? Give feedback.
-
Can you try UMC again but make sure without the Like:
|
Beta Was this translation helpful? Give feedback.
-
Hi, Running the kernel module without parameter still not yield any output
|
Beta Was this translation helpful? Give feedback.
-
I have to put traces in driver to follow the callflow. EDIT: was |
Beta Was this translation helpful? Give feedback.
-
@nhattu1986 Can you please run the attached archive ? To avoid any API conflict, make sure any other versions of CoreFreq is unloaded/uninstalled/removed from your disk. Only this archive has to be Your kernel log should dump some traces as below:
|
Beta Was this translation helpful? Give feedback.
-
Hi This is the kernel output:
|
Beta Was this translation helpful? Give feedback.
-
@nhattu1986 Hello, can you pull latest I would like the output EDIT: expected topology (according to M471A1K43EB1-CWE specs)
|
Beta Was this translation helpful? Give feedback.
-
Hi @cyring I'm building the latest develop branch and got the output:
|
Beta Was this translation helpful? Give feedback.
-
Thanks a lot for your contribution. Wiki CPU support page is updated with Ryzen 7 5800H This development is also available in the CoreFreq ISO image @ www.cyring.fr Other features can also be tested with Cezanne:
|
Beta Was this translation helpful? Give feedback.
Uh oh!
There was an error while loading. Please reload this page.
Uh oh!
There was an error while loading. Please reload this page.
-
Hello
The targeted processors have a CPUID signature among the following:
[Zen3/Vermeer]
AF_21h
56214-B0-PUB_3.05_PPR.pdf
[Zen3/Cezanne]
AF_50h
56569-A1-PUB_3.03_ppr.pdf
[EPYC/Milan]
AF_01h
-
[EPYC/Milan-X]
AF_01h
-
[Zen3/Chagall]
AF_08h
-
[Zen3/Badami]
AF_30h
-
[Zen3+ Rembrandt]
AF_44h
-
Can anyone give a try to the
develop
branch of CoreFreq next version1.92
and post the output of the Client (corefreq-cli -s -n -m -n -M -n -B -n -k -n -C 1
)Thanks for any help
Beta Was this translation helpful? Give feedback.
All reactions