Move from native rpi3 setup to rpi4 in portioner - restore ended "with not reachable"

[steffenschn]

Hi together,

I've tried to finally move my iobroker with yahka from my old rpi3 to a rpi4 with portioner. Everything went as smooth as it could be. At the end I struggled with the yahka adapter. in all cases the HomeKit shows "no response" as soon as the old rpi3 is offline and I turned on the rpi4 with yahka. furthermore adding a new device is showing no "new" devices.

in the basic setup I've created a new iobroker setup and added yahka, just to make sure everything should work. After adding the avahi in the docker setup the new yahka was found and I would be able to add it to HomeKit (what I didn't do).

what I tried:

• backup with backitup, Incl. yahka
• shutdown old rpi3 turn on rpi4
• restore iobroker, scripts, yahka
• yahka starts fine, no errors or warnings in the event log
• homekit devices are all not "responding"

I've also tried to manually backup and restore the /opt/iobroker/iobroker-data/yahka.0.hapdata - same result.

Just for good, as soon as I shutdown the iobroker docker image and turn on the rpi3 again everything keeps on going smoothly.

Any hints what I did miss to make the movement working?