Changing an individual layer height and exposure for inclusion

[ExiMuL]

Hello everyone,
I've been trying for a while to modify the height of a single normal layer and also change its exposure time. Let me explain: I'm looking to integrate elements during the print that are about 0.2–0.3 mm high. In other words, when I want to insert the element, there should be a pause so I can place the material, and then the layer should be printed with an exposure time of around 80–90 seconds (Phenom Prime - Siraya Tech Fast) for a layer height of 0.2–0.3 mm.
I haven’t found any settings in UVtools that allow me to do this for just one layer. Do you have any idea how I could achieve this?
Thank you in advance for any answers you may be able to provide.

[sn4k3]

While this is possible, is only possible with a few printers. What is the printer model?

[ExiMuL]

Hey, i have a peopoly phenom prime, a phrozen sonic mega 8k , and a prusa sl1s
Do you think this could work? Using UV tools? And if not, on which printer could it work?
thank you very much for your response :)

[sn4k3]

peopoly phenom prime and phrozen sonic mega 8k, in teory they support the feature, but in practice most printers failed to print with per layer data. Prusa SL1s not possible at all.
You need to try with the CTB printers.

All you need are:

• Go to Tool - Edit print parameters
• Select per layer range
• Select the layer you want to modify / insert time
• Adjust the settings you want

The setting you want to adjust to give time is the lift height and retract speed. By setting a large lift height and a very low lift and/or retract speed you can give time to trigger the pause manually and insert the piece. However note that you must baby sit your printer or set a timer to go there.

Only a true capable gcode printer can do it automatic.