Bambu-P1S-Dashboard

views:

• title: 3D Printer Control Center icon: mdi:printer-3d-nozzle type: sections sections:
  • type: grid columns: 3 cards:
    • type: heading heading: Printer Status
    • type: custom:mushroom-template-card primary: Print Status secondary: > {% if states('binary_sensor.p1s_01p00c472000402_print_error') == 'on' %} Error Detected {% else %} {{ states('sensor.p1s_01p00c472000402_print_status') | title }} {% endif %} icon: mdi:printer-3d icon_color: > {% if states('binary_sensor.p1s_01p00c472000402_print_error') == 'on' %}red {% elif states('sensor.p1s_01p00c472000402_print_status') == 'running' %}green {% else %}blue{% endif %}
    • type: custom:mushroom-template-card primary: Print Progress secondary: '{{ states(''sensor.p1s_01p00c472000402_print_progress'') }}%' icon: mdi:progress-clock icon_color: > {% set progress = states('sensor.p1s_01p00c472000402_print_progress')|float %} {% if progress > 75 %}green {% elif progress > 25 %}yellow {% else %}blue{% endif %}
    • type: custom:mushroom-template-card primary: Remaining Time secondary: '{{ states(''sensor.p1s_01p00c472000402_remaining_time'') }} minutes' icon: mdi:timer-outline
    • type: custom:mushroom-template-card primary: Estimated Completion secondary: > {% set mins = states('sensor.p1s_01p00c472000402_remaining_time')|int(0) %} {% set hours = (mins / 60)|int %} {% set extra_mins = mins % 60 %} {% set total_mins = now().minute + extra_mins %} {% set extra_hours = (total_mins / 60)|int %} {% set final_mins = total_mins % 60 %} {% set target_hour = (now().hour + hours + extra_hours)|int %} {% if target_hour >= 24 %} {% set target_hour = target_hour % 24 %} {% endif %} {{ target_hour }}:{{ '%02d'|format(final_mins) }} {% if target_hour >= 12 %}PM{% else %}AM{% endif %} icon: mdi:clock-end
    • type: heading heading: Temperature Control
    • type: custom:mushroom-template-card primary: Nozzle Temperature secondary: > {{ states('sensor.p1s_01p00c472000402_nozzle_temperature') }}°C / {{ states('sensor.p1s_01p00c472000402_nozzle_target_temperature') }}°C (Max: 300°C) icon: mdi:printer-3d-nozzle-heat icon_color: > {% set temp = states('sensor.p1s_01p00c472000402_nozzle_temperature')|float %} {% if temp > 250 %}red{% elif temp > 200 %}orange{% else %}blue{% endif %}
    • type: custom:mushroom-template-card primary: Bed Temperature secondary: > {{ states('sensor.p1s_01p00c472000402_bed_temperature') }}°C / {{ states('sensor.p1s_01p00c472000402_bed_target_temperature') }}°C (Max: 100°C) icon: mdi:radiator icon_color: > {% set temp = states('sensor.p1s_01p00c472000402_bed_temperature')|float %} {% if temp > 80 %}red{% elif temp > 60 %}orange{% else %}blue{% endif %}
    • type: heading heading: Fans
    • type: custom:mushroom-fan-card entity: fan.p1s_01p00c472000402_cooling_fan icon_animation: true show_percentage_control: true show_oscillating_control: false layout: horizontal fill_container: true name: Cooling Fan icon: mdi:fan secondary_info: '{{ states(''sensor.p1s_01p00c472000402_cooling_fan_speed'') }}%'
    • type: custom:mushroom-fan-card entity: fan.p1s_01p00c472000402_chamber_fan icon_animation: true show_percentage_control: true show_oscillating_control: false layout: horizontal fill_container: true name: Chamber Fan icon: mdi:fan secondary_info: '{{ states(''sensor.p1s_01p00c472000402_chamber_fan_speed'') }}%'
    • type: custom:mushroom-fan-card entity: fan.p1s_01p00c472000402_aux_fan icon_animation: true show_percentage_control: true horizontal: false layout: horizontal fill_container: true name: Auxiliary Fan icon: mdi:fan secondary_info: '{{ states(''sensor.p1s_01p00c472000402_aux_fan_speed'') }}%'
    • type: heading icon: '' heading: Technical Limits heading_style: subtitle
    • type: custom:mushroom-template-card primary: Max Speed secondary: 500 mm/s icon: mdi:speedometer icon_color: > {% if states('sensor.p1s_01p00c472000402_printing_speed') == 'fast' %}orange {% elif states('sensor.p1s_01p00c472000402_printing_speed') == 'silent' %}green {% else %}blue{% endif %}
    • type: custom:mushroom-template-card primary: Max Flow Rate secondary: 32 mm³/s @ABS icon: mdi:printer-3d-nozzle icon_color: blue
    • type: custom:mushroom-template-card primary: Build Volume secondary: 256 × 256 × 256 mm³ icon: mdi:cube-outline icon_color: blue
    • type: custom:mushroom-template-card primary: Current Nozzle secondary: > {{ states('sensor.p1s_01p00c472000402_nozzle_diameter')|default('0.4') }} mm icon: mdi:circle-small icon_color: blue
    • type: heading icon: '' heading: Build Plate heading_style: title
    • type: entities entities:
      • type: custom:mushroom-template-card primary: Current Plate secondary: | PEI Textured icon: mdi:rectangle layout: horizontal
      • type: custom:mushroom-template-card primary: Max Plate Temp secondary: 100°C icon: mdi:thermometer-high layout: horizontal grid_options: columns: 12 rows: auto
  • cards:
    • type: heading heading: Current Print
    • type: custom:mushroom-template-card layout: horizontal fill_container: true primary: '{{ states(''sensor.p1s_01p00c472000402_task_name'') }}' secondary: >- Layer {{ states('sensor.p1s_01p00c472000402_current_layer') }} of {{ states('sensor.p1s_01p00c472000402_total_layer_count') }} ({{ (states('sensor.p1s_01p00c472000402_current_layer') | float / states('sensor.p1s_01p00c472000402_total_layer_count') | float * 100) | round(1) }}%) icon: mdi:layers-triple icon_color: > {% if states('sensor.p1s_01p00c472000402_print_status') == 'running' %}green{% else %}gray{% endif %}
    • type: custom:mushroom-template-card primary: Material Used secondary: '{{ states(''sensor.p1s_01p00c472000402_total_usage'') }}g' icon: mdi:weight-gram
    • type: custom:mushroom-template-card primary: Cost Per Hour secondary: >- {% set grams = states('sensor.p1s_01p00c472000402_total_usage')|float %} {% set minutes = states('sensor.p1s_01p00c472000402_remaining_time')|float %} {% set cost = (grams * 14.0 / 1000) | round(2) %} {% set hours = (minutes / 60) | round(1) %} {% if hours > 0 %} £{{ (cost / hours) | round(2) }}/hour {% else %} Calculating... {% endif %} icon: mdi:clock-outline icon_color: blue
    • square: true type: grid cards:
      • type: custom:mushroom-template-card primary: Material Cost secondary: >- {% set grams = states('sensor.p1s_01p00c472000402_total_usage')|float %} {% set cost_per_gram = 14.0 / 1000 %} {% set print_cost = (grams
        • cost_per_gram) | round(2) %} £{{ print_cost }} ({{ grams }}g @ £14/kg) icon: mdi:currency-gbp icon_color: >- {% set cost = (states('sensor.p1s_01p00c472000402_total_usage')|float * 14.0 / 1000) | round(2) %} {% if cost > 10 %}red{% elif cost > 5 %}orange{% else %}green{% endif %} fill_container: false grid_options: columns: 36 rows: 1 columns: 1
    • type: heading heading: Temperature History
    • type: custom:apexcharts-card header: show: true title: Temperature History show_states: true series:
      • entity: sensor.p1s_01p00c472000402_nozzle_temperature name: Nozzle type: line stroke_width: 2 curve: smooth yaxis_id: nozzle color: '#e74c3c' show: in_header: true legend_value: true max: 300 unit: °C
      • entity: sensor.p1s_01p00c472000402_bed_temperature name: Bed type: line stroke_width: 2 curve: smooth yaxis_id: bed color: '#3498db' show: in_header: true legend_value: true max: 100 unit: °C chart_type: line span: start: hour apex_config: yaxis:
        • id: nozzle min: 0 max: 300 tickAmount: 5 title: text: Nozzle °C
        • id: bed min: 0 max: 100 opposite: true tickAmount: 5 title: text: Bed °C
    • type: heading heading: Print Controls
    • type: horizontal-stack cards:
      • type: custom:mushroom-template-card primary: Pause Print icon: mdi:pause-circle tap_action: action: call-service service: button.press target: entity_id: button.p1s_01p00c472000402_pause_printing fill_container: false
      • type: custom:mushroom-template-card primary: Resume Print icon: mdi:play-circle tap_action: action: call-service service: button.press target: entity_id: button.p1s_01p00c472000402_resume_printing icon_color: '' grid_options: columns: full rows: 1
    • type: custom:mushroom-template-card primary: Stop Print icon: mdi:stop-circle icon_color: red hold_action: action: call-service service: button.press target: entity_id: button.p1s_01p00c472000402_stop_printing layout: vertical grid_options: columns: 6 rows: 2
    • type: custom:mushroom-template-card primary: Refresh Data icon: mdi:refresh tap_action: action: call-service service: button.press target: entity_id: button.p1s_01p00c472000402_force_refresh_data icon_color: '' layout: vertical
  • type: grid columns: 2 cards:
    • type: heading heading: Camera
    • show_state: false show_name: false camera_view: auto type: picture-entity entity: camera.p1s_01p00c472000402_camera
    • type: entities title: Camera Controls entities:
      • entity: switch.p1s_01p00c472000402_enable_camera name: Camera Feed
      • entity: light.p1s_01p00c472000402_chamber_light name: Chamber Light
      • entity: binary_sensor.p1s_01p00c472000402_recording_timelapse name: Recording Timelapse
      • entity: switch.p1s_01p00c472000402_use_image_sensor_camera name: Use Image Sensor
    • type: heading heading: Settings
    • type: entities title: Print Controls entities:
      • entity: select.p1s_01p00c472000402_printing_speed name: Printing Speed
      • entity: switch.p1s_01p00c472000402_manual_refresh_mode name: Manual Refresh Mode
      • entity: button.p1s_01p00c472000402_force_refresh_data name: Force Refresh Data
  • type: grid columns: 2 cards:
    • type: heading heading: Material Status
    • type: custom:mushroom-template-card primary: Active Material secondary: > {{ states('sensor.p1s_01p00c472000402_active_tray') }} (Slot {{ states('sensor.p1s_01p00c472000402_active_tray_index') }}) icon: mdi:spool icon_color: green grid_options: columns: 9 rows: 1
    • type: custom:mushroom-template-card primary: AMS Humidity secondary: > Index: {{ states('sensor.p1s_01p00c472000402_ams_1_humidity_index') }} {% if states('sensor.p1s_01p00c472000402_ams_1_humidity_index')|float > 30 %} (High - Check Filament) {% endif %} icon: mdi:water-percent icon_color: > {% set humidity = states('sensor.p1s_01p00c472000402_ams_1_humidity_index')|float %} {% if humidity > 30 %}red {% elif humidity > 20 %}yellow {% else %}green{% endif %}
    • type: heading heading: Filament Trays
    • type: horizontal-stack cards:
      • type: custom:button-card entity: sensor.p1s_01p00c472000402_ams_1_tray_1 name: Tray 1 icon: mdi:palette state_display: '[[[ return entity.attributes.color ]]]' styles: card: - background-color: '[[[ return entity.attributes.color ]]]' - color: white
      • type: custom:button-card entity: sensor.p1s_01p00c472000402_ams_1_tray_2 name: Tray 2 icon: mdi:palette state_display: '[[[ return entity.attributes.color ]]]' styles: card: - background-color: '[[[ return entity.attributes.color ]]]' - color: white
      • type: custom:button-card entity: sensor.p1s_01p00c472000402_ams_1_tray_3 name: Tray 3 icon: mdi:palette state_display: '[[[ return entity.attributes.color ]]]' styles: card: - background-color: '[[[ return entity.attributes.color ]]]' - color: black
      • type: custom:button-card entity: sensor.p1s_01p00c472000402_ams_1_tray_4 name: Tray 4 icon: mdi:palette state_display: '[[[ return entity.attributes.color ]]]' styles: card: - background-color: '[[[ return entity.attributes.color ]]]' - color: white
    • type: custom:apexcharts-card header: show: true title: Filament Remaining chart_type: radialBar series:
      • entity: sensor.p1s_01p00c472000402_ams_1_tray_1 name: Tray 1 attribute: remain
      • entity: sensor.p1s_01p00c472000402_ams_1_tray_2 name: Tray 2 attribute: remain
      • entity: sensor.p1s_01p00c472000402_ams_1_tray_3 name: Tray 3 attribute: remain
      • entity: sensor.p1s_01p00c472000402_ams_1_tray_4 name: Tray 4 attribute: remain apex_config: chart: height: 250 plotOptions: radialBar: dataLabels: name: show: true value: show: true suffix: '%' hollow: size: 20%
    • type: heading icon: '' heading: Connectivity heading_style: title
    • type: entities entities:
      • type: custom:mushroom-template-card primary: Network Status secondary: > {% if states('binary_sensor.p1s_01p00c472000402_online') == 'on' %} Connected (WiFi) {% else %} Disconnected {% endif %} icon: mdi:wifi icon_color: > {% if states('binary_sensor.p1s_01p00c472000402_online') == 'on' %} green {% else %} red {% endif %}
      • type: custom:mushroom-template-card primary: Camera Status secondary: > {% if states('binary_sensor.p1s_01p00c472000402_camera_connected') == 'on' %} Connected (720p) {% else %} Disconnected {% endif %} icon: mdi:webcam icon_color: > {% if states('binary_sensor.p1s_01p00c472000402_camera_connected') == 'on' %} green {% else %} red {% endif %}
    • type: heading icon: '' heading: Carbon Filter heading_style: title
    • type: grid columns: 2 cards:
      • type: custom:mushroom-template-card primary: Filter Age secondary: >- {% set days = ((as_timestamp(now()) - states.input_datetime.filter_installation_date.attributes.timestamp) / 86400) | round(0) %} {{ days }} days installed icon: mdi:air-filter icon_color: >- {% set days = ((as_timestamp(now()) - states.input_datetime.filter_installation_date.attributes.timestamp) / 86400) | round(0) %} {% if days > 180 %}red{% elif days > 150 %}orange{% else %}green{% endif %}
      • type: custom:mushroom-template-card primary: Next Change Due secondary: >- {% set next_change = states.input_datetime.filter_installation_date.attributes.timestamp
        • (180 * 86400) %} {{ next_change | timestamp_custom("%B %d, %Y") }} icon: mdi:calendar-clock icon_color: >- {% set days_left = ((states.input_datetime.filter_installation_date.attributes.timestamp
        • (180 * 86400) - as_timestamp(now())) / 86400) | round(0) %} {% if days_left <= 0 %}red{% elif days_left <= 30 %}orange{% else %}green{% endif %} grid_options: columns: 36 rows: 1
  • type: grid cards:
    • type: heading heading_style: title heading: Print Costs
    • square: false type: grid cards:
      • type: custom:mushroom-template-card primary: Material Cost secondary: >- {% set grams = states('sensor.p1s_01p00c472000402_total_usage')|float %} {% set cost_per_gram = 14.0 / 1000 %} {% set print_cost = (grams
        • cost_per_gram) | round(2) %} £{{ print_cost }} ({{ grams }}g @ £14/kg) icon: mdi:currency-gbp icon_color: >- {% set cost = (states('sensor.p1s_01p00c472000402_total_usage')|float * 14.0 / 1000) | round(2) %} {% if cost > 10 %}red{% elif cost > 5 %}orange{% else %}green{% endif %} fill_container: false layout: horizontal
      • type: custom:mushroom-template-card primary: Power Usage secondary: >- {% set material_type = states('sensor.p1s_01p00c472000402_active_filament_type')|lower %} {% if material_type == 'pla' %} ~105W (PLA Average) {% elif material_type == 'petg' or material_type == 'abs' %} ~140W (PETG/ABS Average) {% elif material_type == 'pc' %} ~135W (PC Average) {% else %} ~105W (Default) {% endif %} Power Factor: 0.45-0.63 icon: mdi:lightning-bolt icon_color: blue fill_container: false
      • type: custom:mushroom-template-card primary: Electricity Cost secondary: >- {% set minutes = states('sensor.p1s_01p00c472000402_remaining_time')|float %} {% set hours = (minutes / 60) %} {% set material_type = states('sensor.p1s_01p00c472000402_active_filament_type')|lower %} {% set power = 105 if material_type == 'pla' else (140 if material_type in ['petg', 'abs'] else 135) %} {% set kwh = (hours * power / 1000) %} {% set cost = (kwh * 0.34) | round(2) %} £{{ cost }} ({{ kwh | round(2) }} kWh @ 34p/kWh) icon: mdi:flash icon_color: >- {% set cost = ((states('sensor.p1s_01p00c472000402_remaining_time')|float / 60) * 0.105 * 0.34) %} {% if cost > 2 %}red{% elif cost > 1 %}orange{% else %}green{% endif %} fill_container: false
      • type: custom:mushroom-template-card primary: Total Print Cost secondary: >- {% set grams = states('sensor.p1s_01p00c472000402_total_usage')|float %} {% set material_cost = (grams * 14.0 / 1000) | round(2) %} {% set minutes = states('sensor.p1s_01p00c472000402_remaining_time')|float %} {% set hours = (minutes / 60) %} {% set material_type = states('sensor.p1s_01p00c472000402_active_filament_type')|lower %} {% set power = 105 if material_type == 'pla' else (140 if material_type in ['petg', 'abs'] else 135) %} {% set kwh = (hours * power / 1000) %} {% set electricity_cost = (kwh * 0.34) | round(2) %} {% set total_cost = material_cost + electricity_cost %} £{{ total_cost }} (Material: £{{ material_cost }}, Power: £{{ electricity_cost }}) icon: mdi:calculator icon_color: >- {% set total_cost = (states('sensor.p1s_01p00c472000402_total_usage')|float * 14.0 / 1000) + ((states('sensor.p1s_01p00c472000402_remaining_time')|float / 60) * 0.105 * 0.34) %} {% if total_cost > 15 %}red{% elif total_cost > 7 %}orange{% else %}green{% endif %} fill_container: false grid_options: columns: full columns: 1