- CIC Prefix : EEG
- Author : Nemanja Medakovic
- Verison : 1.0.0
- Date : Oct 2018.
We provide a library for the EEG Click on our LibStock page, as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Library Description
Library only initializes GPIO interface. For more details check documentation.
Examples Description
The application is composed of three sections :
- System Initialization - Initializes peripherals and pins.
- Application Initialization - Initializes ADC and timer interrupt function.
- Application Task - (code snippet) - Reads ADC value and sends results on serial plotter every time when interrupt occurres.
void applicationTask()
{
if (interrFlag == 1)
{
interrFlag = 0;
readADC = ADC_Get_Sample( 0 );
timeRead = interrCnt * time_ms;
plotRes( readADC, timeRead );
}
}Additional Functions :
- void initTimer() - Initializes interrupt time to the desired value.
- void plotRes( uint16_t plotData, uint32_t plotTime ) - Sends ADC data on the serial plotter.
The full application code, and ready to use projects can be found on our LibStock page.
Other mikroE Libraries used in the example:
- Conversions
- ADC
- UART
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.