Backmerge to develop

platformio.ini

@@ -118,7 +118,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/3dc7cf3e233aaa8cc23492cca50541fc099ebfa1.zip
+	https://github.com/meshtastic/device-ui/archive/0f32b64dca418c6465763ec576509a6a2bfbc50a.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]

src/main.cpp

@@ -404,6 +404,16 @@ void setup()
 
     initDeepSleep();
 
+#if defined(MODEM_POWER_EN)
+    pinMode(MODEM_POWER_EN, OUTPUT);
+    digitalWrite(MODEM_POWER_EN, LOW);
+#endif
+
+#if defined(MODEM_PWRKEY)
+    pinMode(MODEM_PWRKEY, OUTPUT);
+    digitalWrite(MODEM_PWRKEY, LOW);
+#endif
+
 #if defined(LORA_TCXO_GPIO)
     pinMode(LORA_TCXO_GPIO, OUTPUT);
     digitalWrite(LORA_TCXO_GPIO, HIGH);

src/mesh/Router.cpp

@@ -529,8 +529,9 @@ meshtastic_Routing_Error perhapsEncode(meshtastic_MeshPacket *p)
 #endif
             // Don't use PKC with Ham mode
             !owner.is_licensed &&
-            // Don't use PKC if it's not explicitly requested and a non-primary channel is requested
-            !(p->pki_encrypted != true && p->channel > 0) &&
+            // Don't use PKC on 'serial' or 'gpio' channels unless explicitly requested
+            !(p->pki_encrypted != true && (strcasecmp(channels.getName(chIndex), Channels::serialChannel) == 0 ||
+                                           strcasecmp(channels.getName(chIndex), Channels::gpioChannel) == 0)) &&
             // Check for valid keys and single node destination
             config.security.private_key.size == 32 && !isBroadcast(p->to) && node != nullptr &&
             // Check for a known public key for the destination

src/modules/AdminModule.cpp

@@ -505,7 +505,9 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
     if (mp.decoded.want_response && !myReply) {
         myReply = allocErrorResponse(meshtastic_Routing_Error_NONE, &mp);
     }
-
+    if (mp.pki_encrypted) {
+        myReply->pki_encrypted = true;
+    }
     return handled;
 }
 
@@ -718,6 +720,13 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
             requiresReboot = false;
         }
 
+#if defined(ARCH_PORTDUINO)
+        // If running on portduino and using SimRadio, do not require reboot
+        if (SimRadio::instance) {
+            requiresReboot = false;
+        }
+#endif
+
 #ifdef RF95_FAN_EN
         // Turn PA off if disabled by config
         if (c.payload_variant.lora.pa_fan_disabled) {
@@ -934,6 +943,9 @@ void AdminModule::handleGetOwner(const meshtastic_MeshPacket &req)
         res.which_payload_variant = meshtastic_AdminMessage_get_owner_response_tag;
         setPassKey(&res);
         myReply = allocDataProtobuf(res);
+        if (req.pki_encrypted) {
+            myReply->pki_encrypted = true;
+        }
     }
 }
 
@@ -1005,6 +1017,9 @@ void AdminModule::handleGetConfig(const meshtastic_MeshPacket &req, const uint32
         res.which_payload_variant = meshtastic_AdminMessage_get_config_response_tag;
         setPassKey(&res);
         myReply = allocDataProtobuf(res);
+        if (req.pki_encrypted) {
+            myReply->pki_encrypted = true;
+        }
     }
 }
 
@@ -1092,6 +1107,9 @@ void AdminModule::handleGetModuleConfig(const meshtastic_MeshPacket &req, const
         res.which_payload_variant = meshtastic_AdminMessage_get_module_config_response_tag;
         setPassKey(&res);
         myReply = allocDataProtobuf(res);
+        if (req.pki_encrypted) {
+            myReply->pki_encrypted = true;
+        }
     }
 }
 
@@ -1116,6 +1134,9 @@ void AdminModule::handleGetNodeRemoteHardwarePins(const meshtastic_MeshPacket &r
     }
     setPassKey(&r);
     myReply = allocDataProtobuf(r);
+    if (req.pki_encrypted) {
+        myReply->pki_encrypted = true;
+    }
 }
 
 void AdminModule::handleGetDeviceMetadata(const meshtastic_MeshPacket &req)
@@ -1125,6 +1146,9 @@ void AdminModule::handleGetDeviceMetadata(const meshtastic_MeshPacket &req)
     r.which_payload_variant = meshtastic_AdminMessage_get_device_metadata_response_tag;
     setPassKey(&r);
     myReply = allocDataProtobuf(r);
+    if (req.pki_encrypted) {
+        myReply->pki_encrypted = true;
+    }
 }
 
 void AdminModule::handleGetDeviceConnectionStatus(const meshtastic_MeshPacket &req)
@@ -1193,6 +1217,9 @@ void AdminModule::handleGetDeviceConnectionStatus(const meshtastic_MeshPacket &r
     r.which_payload_variant = meshtastic_AdminMessage_get_device_connection_status_response_tag;
     setPassKey(&r);
     myReply = allocDataProtobuf(r);
+    if (req.pki_encrypted) {
+        myReply->pki_encrypted = true;
+    }
 }
 
 void AdminModule::handleGetChannel(const meshtastic_MeshPacket &req, uint32_t channelIndex)
@@ -1204,6 +1231,9 @@ void AdminModule::handleGetChannel(const meshtastic_MeshPacket &req, uint32_t ch
         r.which_payload_variant = meshtastic_AdminMessage_get_channel_response_tag;
         setPassKey(&r);
         myReply = allocDataProtobuf(r);
+        if (req.pki_encrypted) {
+            myReply->pki_encrypted = true;
+        }
     }
 }
 
@@ -1213,6 +1243,9 @@ void AdminModule::handleGetDeviceUIConfig(const meshtastic_MeshPacket &req)
     r.which_payload_variant = meshtastic_AdminMessage_get_ui_config_response_tag;
     r.get_ui_config_response = uiconfig;
     myReply = allocDataProtobuf(r);
+    if (req.pki_encrypted) {
+        myReply->pki_encrypted = true;
+    }
 }
 
 void AdminModule::reboot(int32_t seconds)

variants/esp32s3/t-deck-pro/variant.h

@@ -92,3 +92,12 @@
 #define SX126X_DIO3_TCXO_VOLTAGE 2.4
 // Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
 // code)
+
+#define MODEM_POWER_EN  41
+#define MODEM_PWRKEY    40
+#define MODEM_RST  9
+#define MODEM_RI  7
+#define MODEM_DTR  8
+#define MODEM_RX  10
+#define MODEM_TX  11
+